&nbsp;<p><a href="#Program a Silverado Key Fob">Program a Silverado Key Fob</a>&nbsp;
<a href="#Re-program GM Key Remote.">Re-program GM Key Remote.</a>&nbsp;
<a href="#Reset a Factory Alarm">Reset a Factory Alarm</a></p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<a href="http://www.wikihow.com/Main-Page" name="Program a Silverado Key Fob">
<img border="0" src="http://www.wikihow.com/skins/WikiHow/wikiHow.gif" width="211" height="61"></a>
<h1 style='margin-bottom: 0px;'><a href="http://www.wikihow.com/Program-a-Keyless-Entry-for-a-Chevy-Silverado">How to Program a Keyless Entry for a Chevy Silverado</a></h1>
<b><i>from <a href='http://www.wikihow.com/Main-Page'>wikiHow - The How to Manual That You Can Edit</a></i></b><br/>
Instructions to program a keyless entry remote for a GM Truck i.e. Chevy Silverado, Avalanche, Tahoe etc.. They also work on 2003, 2004 and 2006 GM models. (NOTE - The GM dealer will charge $35.00 to do this 1 minute task - what a rip!)
<a name="Steps"></a><h2>  Steps </h2>
<ol><li>Close all the vehicle doors.
</li><li>Insert the ignition key into the ignition lock cylinder - do not turn ignition switch.
</li><li>Press and hold the DOOR unlock switch (This is the switch on the door, NOT the remote).
</li><li>While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF ON, OFF. (3 TIMES)
</li><li>Release the DOOR unlock switch. The doors will lock and unlock one time to confirm the program mode is actuated. Remove the key from the ignition.
</li><li>Simultaneously press and hold the LOCK button and the UNLOCK button on one keyless remote for approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
</li><li>Repeat the previous step to program up to four transmitters. Reprogram any existing remotes at this time as they have been erased.
</li><li>Turn the ignition switch to the ON (one more click forward) position in order to exit the keyless entry transmitter mode.
</li><li>Operate the transmitter functions in order to verify correct system operation.
</li></ol>
 
<a name="Tips"></a><h2>  Tips </h2>
<ul><li>On a 2006 Suburban, the first keyless entry programmed will set to Driver 1, and the second to Driver 2.
</li><li>Works for 2005 TrailBlazer too.
</li><li>Also works on 04 Silverado
</li><li>Also works on 2004 Avalanche with #1 and #2 remotes
</li></ul>
 
<a name="Warnings"></a><h2>  Warnings </h2>
<ul><li>Some models may require security system or other fuses to be removed.
</li></ul>
 
<a name="Related_wikiHows"></a><h2>  Related wikiHows </h2>
<ul><li><a href="http://www.wikihow.com/Get-Your-Driver%27s-License" title="Get Your Driver's License">How to Get Your Driver's License</a>
</li><li><a href="http://www.wikihow.com/Modify-Your-Car-for-Better-Performance" title="Modify Your Car for Better Performance">How to Modify Your Car for Better Performance</a>
</li><li><a href="http://www.wikihow.com/Prevent-Your-Car-From-Getting-Stolen" title="Prevent Your Car From Getting Stolen">How to Prevent Your Car From Getting Stolen</a>
</li><li><a href="http://www.wikihow.com/Program-GM-Keyless-Remotes" title="Program GM Keyless Remotes">How to Program GM Keyless Remotes</a>
</li></ul>
 
<p>
<i>Article provided by <a href="http://www.wikihow.com/Main-Page">wikiHow</a>, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on <a href="http://www.wikihow.com/Program-a-Keyless-Entry-for-a-Chevy-Silverado">How to Program a Keyless Entry for a Chevy Silverado</a>.  All content on wikiHow can be shared under a <a href="http://creativecommons.org/licenses/by-nc-sa/2.5/">Creative Commons license</a>.</i>
</p><p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p>&nbsp;</p>
<p><a href="http://www.wikihow.com/Main-Page" name="Reset a Factory Alarm">
<img border="0" src="http://www.wikihow.com/skins/WikiHow/wikiHow.gif" width="211" height="61"></a>
</p>
<h1 style='margin-bottom: 0px;'><a href="http://www.wikihow.com/Reset-a-Factory-Car-Alarm">How to Reset a Factory Car Alarm</a></h1>
<b><i>from <a href='http://www.wikihow.com/Main-Page'>wikiHow - The How to Manual That You Can Edit</a></i></b><br/>
You've tripped your car alarm and it won't turn off!
<a name="Steps"></a><h2>  Steps </h2>
<ol><li>  Make sure the drivers front(left front) door is closed and you have your car keys.
</li><li>  Insert your door key into the drivers door and turn it to the locked position two times.
</li><li>  Then turn the key to the unlock position twice.
</li><li>  The alarm should be disarmed, now.
</li><li>  SECOND TECHNIQUE:
</li><li>  If not then take the ignition key and turn the ignition switch all the way ON then OFF then ON a second time and OFF again.
</li><li>  These are the procedures for nearly all factory alarm systems.
</li><li>  If neither of these works you probably have an after market(add-on) alarm system. Disarming a after market alarm system with your ignition key will be discussed in a future post.
</li></ol>
 
<a name="Warnings"></a><h2>  Warnings </h2>
<ul><li>This technique is only for use on your own car that you own and have keys for.  If you don't have the keys- disconnect the negative battery cable to stop the horn until you get your keys. Then reconnect the negative terminal and proceed to step one.
</li></ul>
 
<a name="Things_You.27ll_Need"></a><h2>  Things You'll Need </h2>
<ul><li>Keys
</li></ul>
 
<a name="Related_wikiHows"></a><h2>  Related wikiHows </h2>
<ul><li><a href="http://www.wikihow.com/Call-%22Seat-Check%22" title="Call "Seat Check"">How to Call "Seat Check"</a>
</li><li><a href="http://www.wikihow.com/Program-a-Keyless-Entry-for-a-Chevy-Silverado" title="Program a Keyless Entry for a Chevy Silverado">How to Program a Keyless Entry for a Chevy Silverado</a>
</li><li><a href="http://www.wikihow.com/Change-Your-Air-Filter" title="Change Your Air Filter">How to Change Your Air Filter</a>
</li><li><a href="http://www.wikihow.com/Trick-out-a-Really-Bad-Car" title="Trick out a Really Bad Car">How to Trick out a Really Bad Car</a>
</li></ul>
 
<p>
<i>Article provided by <a href="http://www.wikihow.com/Main-Page">wikiHow</a>, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on <a href="http://www.wikihow.com/Reset-a-Factory-Car-Alarm">How to Reset a Factory Car Alarm</a>.  All content on wikiHow can be shared under a <a href="http://creativecommons.org/licenses/by-nc-sa/2.5/">Creative Commons license</a>.</i>
</p>
<a href="http://www.wikihow.com/Main-Page">
<img border="0" src="http://www.wikihow.com/skins/WikiHow/wikiHow.gif" width="211" height="61"></a>
<h1 style='margin-bottom: 0px;'>
<a href="http://www.wikihow.com/Program-GM-Keyless-Remotes" name="Re-program GM Key Remote.">How to Program GM Keyless Remotes</a></h1>
<b><i>from <a href='http://www.wikihow.com/Main-Page'>wikiHow - The How to Manual That You Can Edit</a></i></b><br/>
This is how to program late model GM keyless remotes.
(NOTE - The GM dealer will charge $35.00 to do this 1 minute task - what a rip!)
<a name="Steps"></a><h2>  Steps </h2>
<ol><li> Close all the vehicle doors.
</li><li>Insert the ignition key into the ignition lock cylinder - do not turn ignition switch.
</li><li>Press and hold the DOOR unlock switch (This is the switch on the door, NOT the remote).
</li><li>While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
</li><li>Release the DOOR unlock switch. The doors will lock and unlock one time to confirm the program mode is actuvates.
</li><li>Simultaneously press and hold the LOCK button and the UNLOCK button on one keyless remote for approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
</li><li>Repeat the previous step to program up to four transmitters.
</li><li>Turn the ignition switch to the ON (one more click forward) position in order to exit the keyless entry transmitter mode.
</li><li>Operate the transmitter functions in order to verify correct system operation.
</li><li>[edit] Warnings Some models may require security system or other fuses to be removed.
</li></ol>
 
<a name="Tips"></a><h2>  Tips </h2>
<ul><li>On some models, the first keyless entry programmed will set to Driver 1, and the second to Driver 2.
</li></ul>
 
<a name="Warnings"></a><h2>  Warnings </h2>
<ul><li>Some models may require security system or other fuses to be removed.
</li></ul>
 
<a name="Related_wikiHows"></a><h2>  Related wikiHows </h2>
<ul><li><a href="http://www.wikihow.com/Fix-Falling-or-Droopy-Sun-Visors" title="Fix Falling or Droopy Sun Visors">How to Fix Falling or Droopy Sun Visors</a>
</li><li><a href="http://www.wikihow.com/Remove-Unwanted-Exterior-Lights-from-Your-Vehicle" title="Remove Unwanted Exterior Lights from Your Vehicle">How to Remove Unwanted Exterior Lights from Your Vehicle</a>
</li><li><a href="http://www.wikihow.com/Cool-a-Hot-Car-as-Quickly-as-Possible" title="Cool a Hot Car as Quickly as Possible">How to Cool a Hot Car as Quickly as Possible</a>
</li><li><a href="http://www.wikihow.com/Start-a-Car-After-Filling-With-the-Wrong-Fuel" title="Start a Car After Filling With the Wrong Fuel">How to Start a Car After Filling With the Wrong Fuel</a>
</li></ul>
 
<p>
<i>Article provided by <a href="http://www.wikihow.com/Main-Page">wikiHow</a>, a wiki how-to manual. Please edit this article and find author credits at the original wikiHow article on <a href="http://www.wikihow.com/Program-GM-Keyless-Remotes">How to Program GM Keyless Remotes</a>.  All content on wikiHow can be shared under a <a href="http://creativecommons.org/licenses/by-nc-sa/2.5/">Creative Commons license</a>.</i>
</p>